Welcome, Guest. Please login or register.

Username: Password:

Author Topic: AR and DEC motors move the double  (Read 678 times)


  • Full Member
  • ***
  • Posts: 18
    • View Profile
AR and DEC motors move the double
« on: September 18, 2019, 00:31:53 »

Hi everyone
Yesterday my EQ5 with AstroEQ,  a NEMA14 (1.8) and NEMA17(0.9), was behaving well. The gotos were good enough and so the tracking.
Today, with no change that I am aware of, although the tracking is ok, the goto goes double the angle than it should, in AR and in DEC.
I am not able to find the problem. Somebody could help me

On the other hand, when I try to Calibrate with PHD2, AR axel does not move at all, so the calibration fails.
Thanks a lot