Welcome, Guest. Please login or register.

Username: Password:

Author Topic: Sync  (Read 1759 times)

bojan

  • Full Member
  • ***
  • Posts: 12
    • View Profile
Sync
« on: January 23, 2016, 23:23:15 »

Hi Tom,
When connected with CdC (v2.76.. as EQMOD HEQ5/6.. I hope this is right configuration), I tried to sync on arbitrary object on the other side of the sky.. but it didn't work.. not always. GoTo worked OK.
Is there any limitations, like with StepON (which I was also evaluating for my home built mount).

I was hopring to be able to just power up scope, manually point it to an object on the side of the sky where observation/imaging was planned and GoTo from there on the target, to save setup time.

Thanks in advance!
Bojan
Logged

TCWORLD

  • Administrator
  • *****
  • Posts: 711
    • View Profile
    • AstroEQ
Re: Sync
« Reply #1 on: January 23, 2016, 23:33:01 »

Hi Bojan,

You're probably better off asking on the EQMOD Yahoo! Group as everything computer side is controlled through EQMOD (AstroEQ can only do whatever EQMOD tells it to do).

Kind Regards,
Tom.
Logged
Tom Carpenter (AstroEQ)