Welcome, Guest. Please login or register.

Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - tombkk

Pages: [1]
1
General Discussion / AstroEQ with ZWO ASIAIR PRO
« on: November 02, 2020, 10:18:42 »
I am a newbie to star-guided astrophotography. Currently my AstroEQ PCB4.6 is working fine with a CG-4 EQ mount. Thinking about purchasing an ASIAIR PRO for controling the mount movement (GOTO) via AstroEQ box and, at the same time, adjusting star-position error bases on data from a guide-camera. My idea is as follow:

- connect guide-cam USB port to ASIAIR USB port box via USB cable.
- connect guide-cam ST4 port to AstroEQ ST4 port via ST4 cable.
- connect AstrEQ USB port toASIAIR USB port via USB cable.

Could anyone having experience with AstroEQ-ASIAIR PRO help pointing me to the right direction?. Thank you.
 

2
Hardware Development / Re: AstroEQ Basic Hand Controllers
« on: August 28, 2020, 05:09:30 »
Can you share the covers for the nema17 motors?

U P D A T E
-------------
https://www.thingiverse.com/thing:4598951

  :)
 

3
Hardware Development / Re: AstroEQ Basic Hand Controllers
« on: August 06, 2020, 03:28:05 »
I 3D-printed hand-controller enclosure for the V4.6 PCB from ABS plastic (see 1:57 in the clip). I use a ATTiny85 Arduino board and a five-position switch for mode and speed selection (long-push = cycle through ST-4 - 2x - GOTO mode, click LEFT - RIGHT - UP - DOWN = R.A.- - R.A.+ - DEC+ - DEC-).  There is a red-green LED indicator to indicate the mode (green = ST-4, orange = 2x, red = GOTO). See 2:05 for details.

I also 3D-printed enclosure for 0.9 NEMA-17 DEC (1:28) & R.A. (1:38) motors.

https://www.youtube.com/watch?v=wOYMoVUSzXo

4
DIY AstroEQ / Re: Plastic covers for the motors?
« on: July 30, 2020, 04:27:20 »
I printed motor covers and PCBV4.6 enclosure from ABS-plastic, all designed by myself. STL files will be published on Thingiverse.com

https://www.youtube.com/watch?v=wOYMoVUSzXo&feature=youtu.be

Pages: [1]